|
|
The evaporator temperature sensor is a negative temperature coefficient sensor installed on the metal fins of the evaporator in the air conditioner assembly. Its function is to detect the temperature of the surface of the evaporator, and input the detection result to the automatic air conditioning ...
This sensor is a component of the automatic air conditioner, and corresponds to the indoor air outlet temperature sensor. Their temperature signals are used by the control module to determine the temperature difference and the length of the air conditioner. The main function of the temperature sens...
The temperature sensor inside the car is on the air duct of the car air conditioner. It is a thermistor with a negative temperature coefficient. The resistance of the thermistor will gradually decrease as the temperature increases. Its function is to detect whether the temperature in the car reache...
The automatic transmission oil temperature sensor is installed on the control valve and is used to detect the temperature of the hydraulic oil of the automatic transmission, which is used as the basis for the computer to perform shift control, oil pressure control and lockup clutch control. The int...
The engine intake temperature sensor uses a negative temperature coefficient thermistor, which generates different signal voltages according to the resistance change. It is used to detect the intake air temperature, convert it into a voltage signal and input it to the ECU as a fuel injection correc...
The battery temperature sensor is used to measure the temperature of the battery pole, and the battery temperature is reliably monitored and adjusted during the charging process. When the new energy vehicle is running, the sensor will provide a temperature signal for the BMS to monitor the battery ...
The function of the pressure sensor of the SCR system (car urea package) is to monitor the urea pressure in real time. The dose of urea in the SCR system is ultimately controlled by the engine management system. The amount of urea injected must match the concentration of NOX. While ensuring the red...
The coolant temperature sensor is installed on the engine block or cylinder head, and is in contact with the coolant to detect the temperature of the engine's circulating coolant; it is made of a negative temperature coefficient resistance resistor that is very sensitive to temperature changes, whi...
Gasoline particulate trap: GPF (GASOLINE PARTICULATE FILTER) is a ceramic filter installed in the gasoline engine emission system. It is basically the same as the DPF filtration mechanism of diesel engines. It can capture particulate emissions before they enter the atmosphere.Use environment:The pu...
de@ustsensor.com
